Fir Audio
Fir Audio atom-XL Modules
atom (air transferring open module) is the 3rd generation module technology that was specifically designed to give the user maximum control with front vented In Ear Monitors. Boasting a bass tolerance of 1/2 db make these modules the most advanced way of fine tuning that perfect sound signature you’re looking for. A smaller filter design reduces the air volume in the module chamber which can have a positive effect on sound presentation. The 3 pack set comes with an assortment of +, N, - (plus, neutral, minus). Durability was a high priority with the atom design. Filtering using a precise medical grade tubing allows for a consistent production process. atom is also immune to shock from accidental drops and even humidity. Isolation levels vary among the modules relative to the bass leak.
Specifications
- + Isolation: 17db
- N Isolation: 15db
- - Isolation: 13db
- + Bass: 2db @ 20hz
- N (m15 equivalent)
- - Bass: 2db @ 20hz
Fir Audio IEM Dryer Pro
The IEM Dryer PRO is the ultimate tool for the touring professional monitor engineer. Drying the entire band’s set of in-ear monitors at once is the most efficient way of keeping them moisture free for storage ultimately prolonging their lifespan. In-ear monitors are a powerful but delicate piece of equipment. Performers have active shows resulting in moisture getting into the sound bores and inside the IEM. Being proactive in maintenance decreases downtime and returns to the manufacturer for repair. The IEM Dryer PRO can hold 5-7 pairs of IEM’s with the cables attached. When using a 2 amp power bank charger you can take it on the go when you need to take off right after the show to the next fly date. A USB timer is included to set a limit to the drying time. The Dryer also doubles as a protective case so no need to worry about snagging a cord as teardown can be hectic after a show.
Estimated Ship Date: November 1st.
Contents
- IEM Dryer
- USB C charging cable 6ft
- USB Travel Charger 2.4 amps
Specifications
- Input: USB type C
- Power: 5v, 2.0 amps min, 5v, 3.0 amps max
- 1 year warranty.
Dimensions
- Exterior: 9.5 x 5.8 x 2.8" (24 x 15 x 7cm)
Fir Audio M2
Packing the same tubeless technology as our other groundbreaking models, the M2 uses a dynamic driver for bass extension and midrange engagement unheard of in the segment, and a single tubeless high balanced armature fills the sound with detail and treble extension. Using our proprietary tubeless design and the 3rd generation atom pressure release system, the M2 presents its lightly v-shaped sound with a vast soundstage and pneumatic pressure-free experience ideal for guitarists, drummers and bassists, that redefines what is achievable at this price point.
Like all our other models, the M2 comes with our unbeatable 3 year warranty with the super-reliable FiRcon connection standard, and unlimited design customisation at no extra charge.
Specifications
- Range: 10hz - 20Khz
- Impedance: 14.2ohms
Fir Audio M3
The M3 pays homage to the classic, balanced studio sound while pairing it with FiR’s latest technological advances. Its dedicated bass dynamic driver provides deep bass extension and palpable bass detail, while 2 balanced armatures covering the midrange and treble respectively lend balance to the sound with an excitingly energetic midrange and effortlessly detailed and sparkly highs. These drivers are implemented with our proprietary tubeless design and the 3rd generation atom pressure release system, providing an impeccably balanced sound with a vast soundstage and a pneumatic pressure-free listening experience perfect for extended mixing and audiophile use.
Like all our other models, the M3 comes with our unbeatable 3 year warranty with the super-reliable FiRcon connection standard, and unlimited design customisation at no extra charge.
Specifications
- Range: 10hz - 20Khz
- Impedance: 16.4ohms
Fir Audio M4
Placing a priority on an engaging, musical tuning, the M4 pairs 4 drivers with FiR’s unique technologies to achieve the best rendition of this tuning possible. Utilising a dynamic driver for well-extended and highly textured lows, this is paired with 3 balanced armatures covering the midrange and high frequencies, tuned for a smooth, vast and yet highly resolved sound signature. The internal design is constructed with our proprietary tubeless design and the 3rd generation atom pressure release system, lending the musical sound an even larger soundstage presentation and a pneumatic pressure-free listening experience best suited for vocalists, keyboardists, guitarists and audiophiles.
Like all our other models, the M4 comes with our unbeatable 3 year warranty with the super-reliable FiRcon connection standard, and unlimited design customisation at no extra charge.
Specifications
- Range: 10hz - 20Khz
- Impedance: 6.4ohms
Fir Audio M5
The M5 is the showcase of all the best technology FiR has to offer in the IEM space. Sporting a dynamic driver for lows, 3 balanced armatures for midrange and highs and an electrostatic driver to assist the treble reproduction, the M5 maximises its driver count to present an effortlessly massive sound, with shocking clarity and extension on both ends. We’re also proud to be the first in the world to implement the electrostatic drivers, in addition to all the other drivers in the M5, in a tubeless design, paired with the 3rd generation atom pressure release system to provide the M5 with a cavernous, out of head soundstage and a pressure-free listening experience that is well suited to all professional and audiophile use cases.
Like all our other models, the M5 comes with our unbeatable 3 year warranty with the super-reliable FiRcon connection standard, and unlimited design customisation at no extra charge.
Specifications
- Range: 10hz - 20Khz
- Impedance: 6.8ohms
Fir Audio The Cable Tester
The Cable Tester is the only IEM cable tester that can test for all possible cable-related problems. No matter what brand of IEMs or cable you own, The Cable Tester is designed to work universally. Using the device's channel selector to sweep between ground and positive allows you to not only check for continuity in the wire, but also for shorts. If you are experiencing issues with your IEM cable you need to know exactly what the problem is. Also, testing your IEM cables will ensure that you know that whatever problem you have lies in the cable and not the earpieces. This knowledge can save you a lot of time and money in the long run.
Specifications
- 3 Pole 3.5mm Jack
- Sockets: 2 Pin, MMCX, T2 / IPX (UE), 4 Pin (JH) and MC Card
- Sweep for Shorts and Continuity
- LED Light and Battery test button function
- Runs on (x2) AA Batteries *not included
Dimensions
- L: 91mm
- W: 67mm
- H: 30mm
Fir Audio The Cable Tester Jr.
The Cable Tester Jr. is the only IEM cable tester that can test for all possible cable-related problems. Using the device's channel selector to sweep between ground and positive allows you to not only check for continuity in the wire, but also for shorts. If you are experiencing issues with your IEM cable you need to know exactly what the problem is. Also, testing your IEM cables will ensure that you know that whatever problem you have lies in the cable and not the earpieces. This knowledge can save you a lot of time and money in the long run.
Specifications
- 3 Pole 3.5mm Jack
- Sockets: 2 Pin, MMCX, T2 / IPX (UE) and MC Card
- Sweep for Shorts and Continuity
- LED Light and Battery test button function
- Runs on (x2) AA Batteries *not included
Dimensions
- L: 91mm
- W: 67mm
- H: 30mm
Fir Audio The Headphone VAC
Cleaning IEMs can be tough since earwax, dirt, and other objects can get lodged deep inside the small tubing and bores of the earpiece. Instead of spending time and money shipping your ears back to the factory for a cleaning, you can get a thorough deep clean quickly with Fir Audio’s The Headphone Vac. This is the larger of two IEM vacuum cleaners that we offer making it perfect for maintaining more than one set of ears. This is a must have tool for monitor mix engineers who need to maintain multiple sets of ears each and every night. The Headphone Vac has a durable cast aluminum construction and powerful vacuum motor which make it rugged and ideal for continuous use.
Contents
- Headphone Vac
- Detachable Air Hose
- Hard Carrying Case
- 12v Power Adaptor
- Clear Tube with Accessories and Tips
- 2 Replacement Filters
- User Manual
Specifications
- Flow Rating: 10 Lpm
Dimensions
- L: 153mm
- W: 83.10mm
- H: 50.4mm