You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
English English
ไทย (บาท)

BKK AUDIO Co., Ltd. (Head Office)

  • Your shopping cart is empty!

FIIO

FIIO

Available Options

FiiO - A3

xxx Brand: Fiio

Product Code: FiiO - A3

฿1,950

 

 

 

HS12
About FiiOContact UsJoin UsWarranty PolicyPrivacy policyCopyright © FiiO. All right reser
FiiO - A3
฿1,950
   About FiiO| Contact Us| Join Us| Warranty Policy| Privacy policy| Copyright © FiiO. All right reser..
฿1,950

FiiO - A5

xxx Brand: Fiio

Product Code: FiiO - A5

฿4,190

It's All In The Details                                                                                                  

FiiO has strived to constantly progress and innovate with fresh ideas in the portable amplifier market since its own entry. With the A5, we continue this tradition by striving to significantly improve over our previous products, the E12 series. Every last detail of the E12 series has been reworked and revamped so as to create a new headphone amplifier that not only maintains the E12 series' strenghts, but also rises above them for an even better product. 

Strong Internals Make For A Lively Listen

The A5 continues to use the E12A's highly effective MUSES02 + LME49600 opamp combo. In addition, all major components utilize high-precision metal film resistors. These factors, along with better design and component selection, allow the A5 to achieve a total harmonic distortion (THD) rating of almost 0 percent (lower than the E12A's by 33%) and an improved signal-to-noise ratio of 115dB. All of these factors signify that the A5 has a gain level close to that of the E12, but has improved channel balance, lower noise floor, and overall a purer sound.

Clean and potent power is also extremely important to sound quality. The A5 contains a highly efficient, low-resistance power management system as well as dual +/-11V supplied power. This is a significant increase over the E12A's +/-7.4V supplied power and gives the A5 considerable power reserve that is unheard of among portable amplifiers. Finally, a +/- symmetrical power supply allows for the elimination of coupling capacitors. What does this all mean for the sound quality? Reduced distortion and increased dynamic range.

All of this aspects mean that the A5 combines the best of both the E12 and the E12A. Beyond just getting output power near that of the E12 with 800mW at 32 Ohm, you also get the E12A's exquisite abilities in reproducing music. And with the low/high gain switch you can enjoy the A5 on all kinds of headphones, from the most sensitive IEMs to the most power-hungry headphones. 

Longer Battery Life Backed By Smart Charging

Contained in the A5 is an 880mAh 3S (three cells in series) battery. The A5 can automatically adjust the amount of current to the 3S battery when charging by detecting your particular charging equipment. Whether you charge from your computer's USB port, your cell phone charger, or even your tablet's charger, you can be assured that the A5 will choose the safe and appropriate charging speed. With a 5V/2A charger, the A5's battery can befully topped up in 2.5 hours -- faster and more convenient compared to other similar products. And despite the A5's high power output, the amp still lasts for a lengthy 12 hours. 

Charging That Is Obvious At A Glance

The A5 has an LED specifically designed to let you know device's charging status immediately. Depending on the amount of current when charging, the LED will blink at an appropriate rate which allows you to quicklydetermine the present charging speed. There is also a working status indicator that lets you immediately know whether the unit is on or off. 

All New CNC Milled Headphone Connectors

For the sake of creating an ever better product, no detail could be overlooked. The headphone connector was no exception. For the first time, we use a CNC stainless steel headphone connector ring, replacing the previously used copper. A plastic ring is pressed into the gap between this connector ring and the rest of the body, ensuring it is seamless integrated with zero gaps. Not only is this more aesthetically pleasing, the headphone connector is also sturdier due to the non existent gaps and the use of harder stainless steel.

Geometrical Beauty From A Functional 45°

We decided to break away from our design traditions when creating the A5. Take, for instance, the design of the volume knob. Inspired by string instruments, fifty-six 45° lines are etched onto the knob's surface. The laser-inspired red ring that adorns the knob gives it a distinct, characteristic look.

Fine Grains Of Zirconium For A Smooth Finish 

Instead of the brushed metal finish of our earlier amps, we elected to go with a sandblasted finish for the A5. In the sandblasting process, abrasive material is forcefully sprayed into the body's surface with highly compressed air. This ensures that the surface is not only more durable, but also allows the anodized paint that gives the A5 its unique look to last longer. By having the aluminium body subjected to this process, the A5 is both more robust and striking in appearance.

Specifications

Output power: >800mW (32 Ohm THD <1%)

S/N ratio: >= 115dB

THD+N: <0.002% (1kHz)

Play time on a single charge: 13h

Recommended headphone impedance: 16-300 Ohm

Dimensions: 124mm x 65.5mm x 14.5mm

Weight: 168g

FiiO - A5
฿4,190
It's All In The Details                                                 &nb..
฿4,190

FiiO - E1

xxx Brand: Fiio

Product Code: FiiO - E1

฿350

The FiiO E1 Portable Headphone Amplifier for iPod / iPhone specifically designed for use with Apple’s iPod and iPhone. It is the first headphone amplifier in the world with in-line remote control functions. The FiiO E1 has a built in high quality headphone amplifier IC manufactured by Texas Instruments. The FiiO E1 uses the line out signal from the iPod / iPhone, so it provides better sound quality, and is able to drive high impedance or low sensitivity headphones! With the in-line control function, you can easily control the playback of the iPod / iPhone from the E1 Amplifier! The FiiO E1 will bring you better sound quality and a more convenient playback experience! Output power: 100 mW (16 ohms Loaded), 12 mW (300 ohms Loaded) * Signal to Noise Ratio: â?¥98 dB * Distortion: < 0.009% (10 mW) * Frequency Response: 10 Hz - 80 KHz * Suitable Headphone Impedance: 16 ohms - 300 ohms * Power Supply: iPod/iPhone power 3.3V * Length: 800mm (Line Exposed) * Weight: 20g

FiiO - E1
฿350
The FiiO E1 Portable Headphone Amplifier for iPod / iPhone specifically designed for use with Apple’s iPod and iPhone. It is the first headphone amplifier in the world with in-line remote control..
฿350

FiiO - E12 MONT BLANC

xxx Brand: Fiio

Product Code: FiiO - E12 MONT BLANC

฿3,900

FiiO - E12 MONT BLANC
฿3,900
..
฿3,900

FiiO - E12A

xxx Brand: Fiio

Product Code: FiiO - E12A

฿5,690

FiiO - E12A
฿5,690
..
฿5,690

FiiO - E6 Portable Audio Headphone Amplifier

xxx Brand: Fiio

Product Code: FiiO - E6 Portable Audio Headphone Amplifier

฿950
  • Designed for high impedance and low sensitivity headphones
  • Small, compact, and sleek, with removable clip for convenient and easy use
  • New amplifier circuit, low noise and distortion with enhanced dynamics
  • Built-in EQ with two level bass boost and electronics volume control
FiiO - E6 Portable Audio Headphone Amplifier
฿950
Designed for high impedance and low sensitivity headphonesSmall, compact, and sleek, with removable clip for convenient and easy useNew amplifier circuit, low noise and distortion with enhanced d..
฿950

FiiO - K1 Headphone Amplifier &DAC

xxx Brand: Fiio

Product Code: FiiO - K1 Headphone Amplifier &DAC

฿1,590

FiiO - K1 Headphone Amplifier &DAC
฿1,590
..
฿1,590

Available Options

FiiO - K5 Headphone Amplifier

xxx Brand: Fiio

Product Code: FiiO - K5 Headphone Amplifier

฿4,390

FiiO - K5 Headphone Amplifier
฿4,390
..
฿4,390

FiiO - Kilimanjaro 2 (E11K) Portable Headphone Amplifier

xxx Brand: Fiio

Product Code: FiiO - Kilimanjaro 2 (E11K) Portable Headphone Amplifier

฿1,950

FIIO E11K KILIMANJARO-2

Conscious design and development for high fidelity mobile listening, the new and improved FiiO E11K Kilimanjaro-2 enhances the listening experience of a wide range of headphones, earphones and in-ear monitoring systems. With all aluminium body and chassis the E11K shields against electromagnetic interference and the built-in rechargeable battery provides long playtime.

FiiO E11K combines voltage pre-amplifier and power amplifier to deliver a maximum power output with a wide frequency response. Pre-amplifier OPA1642 serves as the voltage amplifier with great layering and medium and high frequency extension,while the power amplifier AD8397 functions as the current amplifier, with great control of lower frequencies and smooth drive ability.

For controls, the E11K includes a low-high gain toggle switch, a rotary volume control, and a fully discrete bass boost circuit that can be bypassed to decrease interference and lower the overall noise floor.

Way more power behind new design.

FiiO E11K Kilimanjaro-2

New Appearance
All aluminium-alloy body and chassis increases metal texture and increases shielding from EM interference. Improved toggle switches are more reliable and easier to read and operate.

Improved Sound Performance
Pre-amplifier OPA1642 serves as the voltage amplifier with great layering and medium and high frequency extension,while the power amplifier AD8397 functions as the current amplifier, with great control of lower frequencies and smooth drive ability.

Fully Discrete Bass Circuit Design
With bass turned on, the E11K boosts the low frequencies without influencing the overall sound field. In turn, without the bass boost the bass circuit is bypassed, decreasing interference and noise floor to ensure purity of sound quality.

Reinforced Battery Capacity
Built-in rechargeable 1400 mAH battery provides approximately 16 hours of operation on a four-hour charge via mini USB port.

FiiO E11K

TECHNICAL SPECIFICATIONS

  • Power supply: Mini USB port
  • Maximum output power: 450mW (16Ω) / 270mW (32Ω)
  • Frequency response: 20Hz - 20kHz
  • Signal-to-noise ratio: >108dB
  • THD: <0.004%
  • Chyarging time: 4 hours
  • Operating time: up to 16 hours
  • Recommended earphone impedance: 16 - 150Ω
  • Dimensions: 91.2mm x 56mm x 13mm
  • Weight: 92g
 

FEATURES

  • More power behind new design
  • Fully discrete bass boost circuit
  • Full aluminium-alloy body shields against interference
  • Separate voltage pre-amplifier and power amplifier
  • Great control of lower frequencies and smooth drive ability
  • New toggle switches easier to read and operate
  • Reinforced battery capacity of 16 hours

- See more at: http://www.hifiheadphones.co.uk/fiio-e11k-kilimanjaro-2-portable-headphone-amplifier-black.html#sthash.wLhYPWcv.dpuf

FiiO - Kilimanjaro 2 (E11K) Portable Headphone Amplifier
฿1,950
FIIO E11K KILIMANJARO-2Conscious design and development for high fidelity mobile listening, the new and improved FiiO E11K Kilimanjaro-2 enhances the listening experience of a wide rang..
฿1,950
Showing 1 to 9 of 9 (1 pages)