Original SMSL Icon Lightning DAC/Amp for iOS

Tiny DAC/Amp With Lightning Cable

A simple, inexpensive way to improve the sound quality from your iPhone 7 or another iOS device, the SMSL Icon Lightning DAC/amp is built small to go everywhere you do. The compact housing has an integrated microphone, a metallic gray finish, and asymmetrical beveled edges for a hint of style. On the top panel, three buttons allow you to control the volume, answer calls, and play, pause, or skip a song—and a small LED indicates on/off status and blinks during music playback. There’s a 3.5-millimeter jack to connect your headphones on one end, and on the other, an 11.8-inch Lightning cable to plug into your device. Finally, the SMSL Icon offers full-function support for Apple earbuds and is iOS app ready for future firmware updates.

Specs

Metallic housing design

Built-in microphone

Input: Lightning connector

Output: ⅛ in (3.5 mm) stereo headphone jack

Codec: Cirrus Logic (SNR: 112 dB)

Cable length: 11.8 in (30 cm)

Headphone power output: 28 mW at 32 ohm per channel

Lossless stereo 48 Khz digital audio output

Compatible with Lightning port-equipped iPhones, iPods, and iPads

Weight: 0.6 oz (16.5 g)

Included

User manual

FEATURES:

1,Uses ICEPOWER  50AS*2 SE amplifier module which get big power output and ultra-low

 distortion from B&O company in denmark.

2,Using advanced USB audio CM6632A,It support UP to PCM32/384Khz AND DSD512.

3,Well selecting the latest AK4452 chip as audio decoding chip from AKM.

4,Built-in SDB sound which patented belongs to S.M.S.L

5,Built-in Turntables amplifier




SDB:SDB Sound which patented belongs to S.M.S.L.It improves the fidecity of sound.For the best sound effects.SDB is not only improve BASS,but it will adjust dynamic for bass and treble according to input source.

SPECIFICATION:

Input:USB/Optical/Coaxial/Analog

THD+N: DAC out: 0.0005%        PHONE OUT:0.004%   Speaker out:0.0025%

PHONO INPUT:MM

Dynamic range:110dB

SNR:DAC out:100dB    PHONE OUT:93dB   Speaker out:117dB

USB transfer mode:Asynchronous compatible

USB compatibility:Windows XP/7/8/8.1/10;

                                Mac OSX 10.6 up

                                Linux;

Samping rate:USB PCM 44.1Khz--384KHz

                       USB DSD 2.8244MHz,5.6488MHz

                                        11.2MHz, 22.5792MHz

                    Optical,coaxial:44.1KHz---192Khz

PHONE Output power:32ohm   330mW@THD=0.13%

                                     64ohm   545mW@THD=0.12%

                                   150ohm   240mW@THD=0.16%

                                   300ohm   122mW@THD=0.13%

Product size:198*215*45mm

Package included:USB cabel/AC cable/Remote control/Driver Disc/Manual/

Features:

Equipped with a PCM2704 DAC chip, it supports sampling rates up to 16 bit/48 kHz, and connects to your Android smartphone’s Micro-USB input to improve output power. The indented edges make it easy to hold onto with your thumb and index finger, while two-button volume control glows green to indicate when you’re connected. Plug your favorite IEMs into the 3.5-millimeter jack, and enjoy a better-sounding commute.







Specification:

• Casing: Black oxidized aluminum
• DAC chip: PCM2704
• Sampling rates: 16 bit, 32/44.1/48 kHz
• USB transmission: Synchronous
• Power: 0.5 W
• Dynamic range: 95 dB
• Signal-to-noise ratio: 95 dB
• THD + N: 0.009%
• Connector: 3.5 mm headphone jack
• Compatibility: Android 4.0 and above
• Dimensions: 1.5 x 0.7 x 0.3 in (3.7 x 1.7 x 0.8 cm)
• Weight: 0.3 oz (8.4 g)
• Included Zippered carrying case
• 
• 
  

Sanskrit pro-B featured with optical, coaxial, USB and bluetooth input Superior performance, light cabinet, Decoding DSD which provide audiophile with high quality audio enjoyment and convenient usage.Sanskrit pro-B born from CM6632A and AK4490EQ perfect match.





Asynchronous USB audio solution adopt CM6632A as receiver chip which can achieve high-spend transmission of original DSD file. Core decoding part uses with the newest AK4490EQ chip from AKM company, which most support to PCM32bit/384kHz and DSD128 decoding. Sanskrit pro-B almost get the highest features and specification.






Sanskrit pro-B build with 4.0 version bluetooth module. SNR reach to 98dB which is the highest in bluetooth audio DAC. Lossless APT-X audio transmission is based on digital audio compression algorithm of ADPCM(SB-ADPCM) technology.






Sanskrit pro-B specification:

Input:

         USB / Optical / coaxial / bluetooth

Output level: 

                      2.0 Vrms

THD+N: 

              0.0006%(-3dBFS)

Dynamic: 

               118dB

SNR: 

         120dB

Channel separation: 

                                    115dB

USB compatibility: 

                                Windows / Mac OS X / iOS /  Android / Linux




Bluetooth code: 

                            Apt-X / SBC / AAC

USB: 

         16bit - 32bit

Coaxial OPtical: 

                            16bit - 24bit

Bluetooth:

                  16bit

Sampling rate:

                          USB PCM 32kHz - 384kHz

                          USB DSD 2.8224MHz, 5.6448MHz

optical / coaxial :

                             32kHz - 192kHz

Bluetooth:

                    48kHz




Bluetooth range: 7meters ( straight without obstacles )




Power consumption: 2.5W

Stand by consumption: 0.9W

Product size: 98mm x 36mm x 144mm

Package weiht: 0.85KG




Package size: 250mm x 190mm x 170mm