DOUBLE HELIX CABLES
DOUBLE HELIX CABLES
Complement4 Balanced Adapter
DHC SP-wired Adapter – OCC silver litz – Connect anything to anything
DHC offers a silver adapter that is 100% custom. For one set price you can design an adapter to your own needs and specifications. Just order the number of adapters you need, then let us know in the “order comments” box during checkout (or email us at doublehelixcables@gmail.com) with the length and what gear/cables you’d like to connect, and we will consult with you to design something that works. Like all of our products, this adapter will have no negative impact upon the audio signal, providing a seamless connection – it will not be the weak link or a third wheel.
DHC adapters have long dominated our production schedule due to their popularity, but rather than discontinue them entirely, we have opted to make the wait time indefinite for orders of just adapters. This means 4-6 months or longer. Do not order unless you are prepared to wait an indefinite amount of time.
Features:
“Silver Peptide” ultrapure OCC silver litz
Up to 8 inch length
Includes most types of connectors.
To specify the type of adapter you want, during checkout there is an “order comments” box to write in the instructions of the adapter type you’d like.
Possible adapter types include:
3 pin female XLRs to 4 pin XLR male
4 pin XLR female to 3 pin female XLRs
3 pin female XLRs to 1/4″ male
3 pin female XLRs to 1/8″ male
4 pin XLR female to 1/4″ male
4 pin XLR female to 1/8″ male
1/8 female to 1/4″ male
1/4″ female to 1/8″ male
Double Helix Cables - DHC Ultrashort Complete Collection – use 1 cable with all gear
xxx แบรนด์: Double Helix Cables
รหัสสินค้า: DHC Ultrashort Complete Collection – use 1 cable with all gear
DHC Ultrashort Universal Complete Collection
Use one cable with all your gear.
Six adapters. Cover all your bases.
Any cable with the 2.5mm balanced Astell & Kern plug will connect to all amp types…
The DHC Universal Ultrashort adapters are intended to allow one cable to reach maximum versatility. Paired with our Triple Threat adapters and an Audeze/2.5mm cable from DHC, one could use 1 cable for all amps and all headphones…
The DHC Advantage:
- Price includes the 6 most popular configurations: 2.5mm to 3.5mm stereo, 6.3mm stereo (1/4), ALO/RSA Kobiconn balance, 4.4mm Sony TRRRS, 3.5mm TRRS for Hifiman/LHLabs/Cowon, and 4-pin XLR balanced. With these, you can connect to practically all gear.
- Best starting point – the 2.5mm female balanced connector. Other adapter systems use a connector with no gear that it can connect directly to, or a bulky plug choice, but the compact & robust 2.5mm balanced plug works natively with Astell & Kern, Glove Audio, and more.
- Shortest possible signal path. It doesn’t get any shorter than this.
- Best signal quality – wherever possible, the male and female plugs that comprise each adapter are
connected directly with solder or extremely short, solid OCC silver wires. - Most reliable jacks used – the only fully custom 2.5mm female jacks, from Eidolic – with long-life, heavily plated bronze contacts
- Integrated designs – 2.5mmjacks are hidden inside the complete plugs
- Highest performing Eidolic plugs used – including the rhodium/silver fiber Eidolic 6.3mm and the tellurium copper/rhodium Eidolic 4 pin XLR
- Arrives in a custom hardcase with fitted foam cutouts
- Optional 2.5mm to dual 3 pin XLR DHC Adapter
Double Helix Cables - Eidiolic E-SX6 Ultracompact Y-Splitter
Eidolic E-SX6
Eidolic’s splitter for purists – the E-SX6 – is the embodiment of simplicity and minimalism. Lathed from 10mm aluminum rod, it is the splitter for those that find most splitters too large and bulky, with finishes new to the Eidolic product line.
Affordable and tiny. At 10mm diameter x 20mm length, but with 3mm front holes and 8mm back holes, this splitter can accommodate 4 and 8-wire cables while maintaining the minimum dimensions. Due to its one-piece construction made in a continuous CNC operation, competitive pricing is possible.
Lighter than air. Tipping the scales at only 1.3 grams, this is as light as it comes – approximately equivalent to just using a makeshift y-split out of heatshrink tubing. Aircraft-grade aluminum is the lightest metal suitable for splitters, and the outer finish is highly resistant to everyday wear.
Understated flair. The blasted gunmetal-anodized finish is a newcomer to the Eidolic collection, with contrasting bright chamfers at each end. A series of nine engraved rings are machined into the body. All edges are smoothly finished and a rubber grommet is included to seal the splitter’s entry.
Double Helix Cables - Eidolic 2.5mm "spacious barrel" for Astell & Kern 4 pole TRRS
Perfect size and shape. The 2.5mm connector must be a perfect fit for the exacting specifications of the Astell & Kern lineup, while allowing an easy installation of a variety of headphone, interconnect, and in-ear-monitor cables. We have a streamlined 10mm barrel diameter that will fit very compact jack layouts, but a 8mm front and rear opening will fit the vast majority of cables. The flush front face allows dimensional stability when mated with the music player, preventing jack stress. Barrel length has been reduced slightly for better portability.
Ideal installation conditions. The solder contacts inside the plug are thoroughly insulated and properly spaced to allow effortless cable installation. While all 4-contact plugs require extra attention to install, there is even more room inside the barrel than before so that your cable can be soldered with less difficulty than before. This design has been prototyped and tested over an extended period to ensure it goes the distance – over the past 2 years its track record has been stellar. The barrel is treated to ensure its interior is nonconductive, and the plug avoids the use of magnetically charged materials wherever possible.
The best metallurgy for each design. A high-conductivity, high strength combination of gold and brass is employed for this connector. Superior plating thickness and complete plating of all plug surfaces set this connector apart.
Unique barrel aesthetics. The Eidolic 2.5mm balanced plug for Astell & Kern is incredibly light and compact due to the choice of materials, which also confer a near-indestructible exterior; the revised dimensions reduce weight slightly. The new gunmetal gray anodized aluminum shell is textured with a proprietary process that yields a tough, matte finish that sparkles in the light. A distinctive gray Eidolic logo is screened and cured onto the upper area of the barrel. Even the most abrasive conditions will not harm the exterior of these connectors.
Upgrade to titanium. A one-of-a-kind titanium alloy upgrade barrel with laser logo and choice of decorative insert. For more information, click here. Check the box above to opt for a truly unique connector style.
Double Helix Cables - Eidolic 3.5mm universal extended-tip plug (fits Beyer, Final…)
Priced per plug.
New model:
The revised universal plugs with 5.5mm tip width (fitting Beyerdynamic perfectly) with a new gunmetal finish, these also fit our Meze 99 mod. We still have limited stock of the old black/red model which does not fit the Meze mod and is a very tight fit on Beyers, at a discounted price.
Old model:
The Eidolic 3.5mm universal extended-tip plug is a complete solution for the versatile 3.5mm connections, featuring a simplified installation process, enhanced durability, superior ergonomics, and a unique appearance. These connectors fit the following applications:
Dual Entry:
Focal Elear
Meze 99 Classics, when used with our easy to install mod
Beyerdynamic T1 and T5 2nd Generation*
Denon D7100 and D600
Velodyne VTrue
Mcintosh MHP1000
Sony MDR-Z7
Sony MDR-Z1R
Final Audio Pandora Hope, Sonorous, all of the “locking” 3.5mm jack headphones
Single Entry:
Focal Listen
Beats Studio and other Beats headphones
V-Moda
Focal
Philips Fidelio
Master & Dynamic
Or any headphone with a 3.5mm jack
*We have revised the Universal 3.5, its price remains the same – it is redesigned for a perfect fit with Beyer T1 and T5. It is identical otherwise to the original Eidolic Universal 3.5mm plug.
The previous model’s extended tip is slightly wider and is a tighter fit for Beyerdynamic T1, but fits everything else normally. The T1/T5 headphones’ earcup jacks are mounted in a plastic opening which can wear and get rough and lead to a tighter fit with these plugs than intended; the previous plugs are offered at a discount. They will still fit most T1/T5 fine, but we recommend going with the new revision for T1/T5.
Design Elements:
Perfect size and shape. The diverse dimensions of 3.5mm headphone jacks offer a unique challenge to the audio cable industry and anyone looking to build a high-performing cable. There is really no good way to support custom cables for these headphones simultaneously until now. We have a streamlined 9mm barrel diameter that will fit very compact jack layouts, but a newly-expanded 7mm rear opening and 7mm front opening will fit the vast majority of cables. We have also shortened the barrel slightly to make the plugs less obtrusive.
The secret to this plug is an 11mm extension behind the plug shaft allows for precision fit into these headphones’ recessed openings, and will fit a variety of future headphones that use this connection standard. Even headphone types that were impossible to support before – like Beats and Beyerdynamic T1 2nd Generation – with deep, slant-cut 3.5mm jacks – are no problem here. This design is one-of-a-kind and is not based on any other designs, engineered specifically for a universal fit with countless new applications appearing with each new headphone release. They are secure for flush sockets such as Master & Dynamic headphones, but also have the required length to fit obscured sockets such as Focal Spirit One.
Ideal installation conditions. The solder contacts inside the plug are thoroughly insulated and properly spaced to allow effortless cable installation, without the risk of shorts or compromised insulation. In this way, we avoid tiny, stacked contacts that are easy to short and difficult to maneuver around. This design has been prototyped and tested over an extended period to ensure it goes the distance. The barrel offers ample room inside and is treated to ensure its interior is nonconductive, and the plug avoids the use of magnetically charged materials wherever possible.
The best metallurgy for each design. A high-conductivity, high strength combination of gold and brass is employed for this connector. Superior plating thickness and complete plating of all plug surfaces set this connector apart.
Unique barrel aesthetics. The Eidolic 3.5mm universal plug is incredibly light and compact due to the choice of materials, which also confer a near-indestructible exterior; the revised dimensions reduce weight slightly. The new black anodized aluminum shell is textured with a proprietary process that yields a tough, matte finish that sparkles in the light. A distinctive crimson Eidolic logo is screened and cured onto the upper area of the barrel. Even the most abrasive conditions will not harm the exterior of these connectors.
Double Helix Cables - Eidolic 6.3mm rhodium (1/4″) Connector (Gunmetal + Silver Fiber)
xxx แบรนด์: Double Helix Cables
รหัสสินค้า: Eidolic 6.3mm rhodium (1/4″) Connector (Gunmetal + Silver Fiber)
Eidolic 6.3mm Plug
In stock!
Gunmetal + Silver Fiber
The Eidolic 6.3mm (1/4”) connector for headphone & professional audio makes its debut with unique, unmistakeable styling, formidable build quality, and optimal electrical performance. The focal point and nerve center of the best headphone cables…
A design first.
This connector is the headphone world’s first glimpse at new carbon fiber finishes, featuring silver carbon fiber inlaid into a custom-textured aluminum barrel that combines low mass and high strength. All contact surfaces are plated with pure rhodium and the barrel is highlighted by a dark grey Eidolic icon. The Eidolic 6.3mm connector stands alone in aesthetics.
Function over form.
Before Eidolic could offer the most refined 6.3mm connector in audio, a number of variables had to be considered. The plug barrel features a generous 10mm rear opening that fits an included rubber grommet, obviating the need for heatshrink. All the inner barrel surfaces are anodized, preventing shorts, and the contact tabs were optimized to easily take up solder with low heat. The engineering plastic used for insulation can withstand extended applications of intense heat without breaking down & losing form or disrupting the integrity of the signal connection. The contacts are widely spaced so that any cable design can be amply accommodated. The needs of the production cable technician are the foremost concern.
Superlative audio performance.
The nonconductive aluminum barrel provides ample shielding for the signal wires and the copper alloy plug chassis is the best blend of rigidity and conductivity. The connector’s heavy layer of rhodium plating endures relentless cycles of connection/disconnection without losing plating to abrasion; rhodium is prized for its combination of conductivity and hardness.
Double Helix Cables - Eidolic Compact 2.5mm 4 pole TRRS Plug
Eidolic Ultra-compact 2.5mm 4 pole TRRS Balanced Plug
For Astell & Kern, Onkyo, and more
Eidolic’s most compact 2.5mm plug returns. Featuring a perfect size and shape for compact headphone cables & adapters. The 2.5mm connector must be a perfect fit for the exacting specifications of each portable media player, while allowing an easy installation of a variety of headphone, interconnect, and in-ear-monitor cables. We have a streamlined 6.8mm barrel diameter that will fit very compact jack layouts, but a 5.6mm rear opening will fit the majority of cables. The flush front face allows dimensional stability when mated with the music player, preventing jack stress. The revised 17mm barrel length is quite short to reduce strain on source components while offering ample strain relief.
Ideal installation conditions. The solder contacts inside the plug are thoroughly insulated and properly spaced to allow effortless cable installation. While all 4-contact plugs require extra attention to install, there is ample room inside the barrel so that your cable can be soldered with less difficulty than before. This design has been prototyped and tested over an extended period to ensure it goes the distance. The barrel is treated to ensure its interior is nonconductive, and the plug avoids the use of magnetically charged materials wherever possible.
The best metallurgy for each design. A high-conductivity, high strength combination of gold and brass is employed for this connector. Superior plating thickness and complete plating of all plug surfaces set this connector apart.
Unique barrel aesthetics. The Eidolic 2.5mm balanced plug for Astell & Kern is incredibly light and compact due to the choice of materials, which also confer a near-indestructible exterior. The anodized aluminum shell is textured with a proprietary process that yields a tough, matte finish that sparkles in the light – now with a “gunmetal” gray style. A stealthy black Eidolic logo is screened and heat-cured onto the upper area of the barrel. The barrel is impervious to everyday wear & tear.
Article composed with the online wysiwyg editor. Please subscribe for a membership to remove promotional messages like this one from the edited documents.
Double Helix Cables - Eidolic Compact 2.5mm Mono Headphone Plug – Hifiman, Oppo & More
Eidolic Ultra-compact 2.5mm Mono Plug (Pair)
In stock.
The Eidolic 2.5 mono plug is a complete solution for the Hifiman, Oppo, Sennheiser, and other 2.5mm headphones, featuring a simplified installation process, enhanced durability, superior ergonomics, and a unique appearance.
Fits:
Hifiman HE1000
Hifiman HE-X
Hifiman HE560 (new version)
Hifiman HE400S (new version)
Hifiman Susvara
Hifiman HE400i (new version)
Oppo PM-1
Oppo PM-2
Audioquest Nighthawk
Sennheiser HD700
Sold in pairs.
Design Elements:
Perfect size and shape. The 2.5mm connectors offer a unique challenge to the audio cable industry and anyone looking to build a high-performing cable. Eidolic paved the way for a universal connector for a variety of today’s 2.5mm-compatible headphones. We have a significantly streamlined 8mm barrel diameter that will fit very compact jack layouts, but a 6.3 mm rear opening will fit the vast majority of cables. The extended, narrow collar behind the plug shaft allows for precision fit into these headphones’ recessed openings, and will likely fit a variety future headphone releases that use this connection standard. The long shaft length will fit openings both wide (HD700) and narrow (Oppo), with socket depths both deep (HD700) and shallow (Oppo). This design is one-of-a-kind and is not based on any other designs, engineered specifically for these two headphone series’ with countless possible applications in the future.
Ideal installation conditions. The solder contacts inside the plug are thoroughly insulated and properly spaced to allow effortless cable installation. Just solder the positive and negative wires for each channel’s Eidolic 2.5mm plug, screw on the barrel, and top up the barrel with hot-melt adhesive for a cable that will last the life of your headphones. This design has been prototyped and tested over an extended period to ensure it goes the distance. The barrel is treated to ensure its interior is nonconductive, and Eidolic plugs avoid the use of magnetically charged materials wherever possible.
The best metallurgy for each design. A high-conductivity, high strength combination of gold and brass is employed for this connector. Superior plating thickness and complete plating of all plug surfaces set this connector apart.
Unique barrel aesthetics. The Eidolic 2.5mm mono plug is incredibly light and compact due to the choice of materials, which also confer a near-indestructible exterior. A bright chamfered ring on the front edge sets this brand-new connector apart. The anodized “gunmetal” aluminum shell is textured with a proprietary process that yields a tough, matte finish that sparkles in the light. A subtle gray Eidolic logo is screened and heat-cured onto the upper area of the barrel. The barrel is impervious to everyday wear & tear.